Tile floor refinishing
VCT Strip and Wax in Irving
Worn wax off. Sealer on. Fresh coats. Burnished shine. All done while the building is closed.
Yellow Floors Do Not Buff Back
Floor wax wears. Dirt gets ground into it. Mopping leaves a film. Layer by layer, the finish turns cloudy and yellow, and the hallways and doorways go dark. You can buff it, but past a certain point that just polishes the grime. What it needs is a complete strip and refinish. Here is how we do it. First, stripping chemical goes on and breaks down the old coat. Then the machine scrubs. The slurry gets vacuumed up and the tile is rinsed until it is bare and clean. Then a sealer coat. Then several thin coats of finish, each one dried before the next goes on. Last, a high-speed burnisher hardens the finish and pulls up the shine. The result looks like new tile and holds up longer. We do this work in Irving offices, classrooms, sanctuaries, shops and clinics, almost always overnight or on a weekend. Your account manager sets the date, tells you what will be moved and lets you know when the floor is ready for traffic. One person. Start to finish.
Every Step
A full job runs like this.
Room cleared
Chairs and tables out. Back in once it cures.
Edges by hand
Corners and wall lines worked by hand so nothing gets missed.
Old wax stripped
Chemical on, machine scrubbing until the old coat lets go.
Slurry out
Picked up and rinsed until the tile is bare.
Sealer down
A base coat that gives the finish something to grip.
Finish coats
Thin coats, dried between each. No shortcuts.
Burnished
A fast-spinning pad toughens the surface and makes it shine.
Care plan
Tips on mopping and burnishing so the shine lasts.
How the Job Goes
Your manager looks at the floor
Square footage, finish condition and how the room is used. That sets the coats and the time needed.
Pick the night
A night or weekend when the room is empty. You know what moves and when it is back.
Crew does the work
Strip, seal, coat, burnish. Room put back. We tell you when the heavy stuff can go back.
Why Us for Floors
Our machines
Strippers, wet vacs, burnishers. We own them.
Same manager
Floors and nightly cleaning answer to one person.
Done right
Each coat dries fully. That is what keeps the finish from peeling.
- Equipment included
- Overnight scheduling
- Furniture handled
- One manager
Floors Looking Tired?
Tell us the square footage and what the tile looks like. We will look at it or price it from your description.